am supposed to change this device local credentials to aaa-servers group which points to LDAP servers.
could someone help me with the document/configuration steps required for CSR1000v to configure LDAP servers in aaa-server group . I never used LDAP previously, so, Not sure about those attributes and syntax required.
Cisco IOS XE Software, Version 16.12.01a Cisco IOS Software [Gibraltar], Virtual XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.12.1a, RELEASE SOFTWARE (fc2)
I am involved in rolling out about 40 wifi networks using cisco 3602/2802 aps and cisco 5508 ISE. Our network offers a 2 step authentication with user and machine certificates as well as users needing to be in correct AD groups. The problem we have i...
ASA Site-to-Site VPN using IKEV1 Configuration Example
Configure a Site-to-Site IPSec IKEv1 Tunnel Between an ASA and a Cisco IOS Router
Site-to-Site IKEv2 Tunnel between ASA and Router Configuration Examples
Site-to-Site VPN Tunnel wit...
Dear Community, So, according to the Cisco ISE Release 2.7 Administrator Guide, it should be possible to use a remote lock/wipe on MDM-devices that connect through ISE on the network( see the screenshot in the attachment).The problem is that th...
Hi, We currently have 2 Cisco 5525X ASA's in active/standby state. We have 750 concurrent Anyconnect licenses with the below licenses:AC-PLSM-5YR-500-S & AC-PLSM-5YR-250-S. (These are expiring soon) I have asked to get these renewed by our l...
Hi Everyone, Does anyone know if it is possible create a NAT for Cisco Anyconnect to a different IP so that the user doesn't have to use the External IP? We want to use a different dns name and assign to a different set group of users. Thank you...