Debug problem with Cisco ASA 5512-X, ASA 9.1(2)

evilannanas · ‎10-16-2013

Hello!
I've set up an ASA 5512-X running ASA version 9.1 as a firewall and VPN-server for my client. While debugging a IPSec-L2L to a remote site the ASA crashes(?) and reboots after maybe a minute or so. What happens then is that my remote SSH-conenction drops and I can't log back in for a couple of minutes while the ASA is rebooting. When the ASA is online again I need to login quickly and disable the debugging in order to prevent the machine from rebooting over and over again.

This happens when I issue the command firewall(config)# debug crypto ikev1 250

What could be the cause of this? All help is much appreciated!

Patrick Moubarak · ‎10-16-2013

Hi, are you running in multiple context mode?

possible bug when changing config: CSCua92694

I suggest opening a TAC ticket since this is severe.

Patrick

evilannanas · ‎10-17-2013

Hi,

The firewall is operating in single context mode so the bug you are referring does likely not apply to my scenario. I shall try to open a support case as you suggested. Thank you for your input!

/Gustav