12-25-2004 02:16 AM
Dear All
I have Cisco 3745 router with NM-8A/S module and 12.3.IOS.
My pc is connected to router through analog Dlink modem through PSTN network.
When I dial my PC does not get the IP.
Please send the router configuration for this setup.
My current configuration is as follows:
interface FastEthernet0/0
ip address 172.x.x.x.255.240.0
duplex auto
speed auto
no clns route-cache
!
interface Serial0/0
bandwidth 256
ip address 192.168.130.109 255.255.255.252
service-policy output voice
encapsulation ppp
ip tcp header-compression iphc-format
no clns route-cache
ip rtp header-compression iphc-format
!
interface FastEthernet0/1
ip address 157.x.x.x.255.224.0
shutdown
duplex auto
speed auto
no clns route-cache
!
interface Serial1/0
physical-layer async
ip unnumbered FastEthernet0/0
encapsulation ppp
dialer in-band
dialer rotary-group 1
dialer-group 1
async mode interactive
peer default ip address pool dialup
no clns route-cache
!
interface Serial1/1
physical-layer async
ip unnumbered FastEthernet0/0
encapsulation ppp
async mode interactive
peer default ip address pool dialup
no clns route-cache
!
interface Serial1/2
physical-layer async
ip unnumbered FastEthernet0/0
encapsulation ppp
dialer in-band
dialer rotary-group 1
dialer-group 1
async mode interactive
peer default ip address pool dialup
no clns route-cache
!
interface Serial1/3
physical-layer async
ip unnumbered FastEthernet0/0
encapsulation ppp
dialer in-band
dialer rotary-group 1
dialer-group 1
async mode interactive
peer default ip address pool dialup
no clns route-cache
!
interface Serial1/4
no ip address
shutdown
no clns route-cache
!
interface Serial1/5
no ip address
shutdown
no clns route-cache
!
interface Serial1/6
no ip address
encapsulation ppp
shutdown
no clns route-cache
!
interface Serial1/7
no ip address
shutdown
no clns route-cache
!
interface Dialer1
no ip address
encapsulation ppp
dialer in-band
dialer map snapshot 1 name Cisco3745 broadcast
dialer hold-queue 10
dialer-group 1
peer default ip address pool Dialin-Group-1
no cdp enable
ppp authentication chap
no clns route-cache
!
ip local pool Dailin-Group-1 192.168.16.201 192.168.16.208
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0
ip route 157.10.x.x.x.224.0 172.10.48.2
ip route 157.10.x.x.x.255.0 172.10.48.2
ip route 172.10.x.x.x.240.0 172.10.48.2
!
ip http server
no ip http secure-server
!
access-list 103 permit udp any any range 16384 32767
access-list 104 permit tcp any any eq 1720
access-list 104 permit tcp any any gt 11000
access-list 104 permit tcp any any range 2000 2002
!
gateway
!
!
!
line con 0
speed 115200
line 33
login local
modem InOut
modem autoconfigure discovery
transport input all
autoselect during-login
autoselect ppp
stopbits 1
speed 115200
flowcontrol hardware
line 34 36
login local
modem InOut
modem autoconfigure discovery
transport input all
autoselect during-login
autoselect ppp
stopbits 1
speed 1200
line aux 0
line vty 0 4
password xxxx
login
!
end
With Regards
Anand
Please reply immediatelly
12-25-2004 03:34 AM
Hello Anand,
looking at your configuration, I can see that he peer default ip address pool you have specified under your Dialer 1 interface has a differnt name than the one specified in global mode:<
interface Dialer1
--> peer default ip address pool Dialin-Group-1
--> ip local pool Dailin-Group-1 192.168.16.201 192.168.16.208
Not sure if this is a typo, but the names both have to match. Can you try and change this and see if it works ?
Regards and Merry Christmas,
GP
12-25-2004 04:20 AM
Dear Sir
I have modifyed the dialer list according to you, but it is still not working.
Is the other configuration is ok or not.
Is is require some more configuratin,if yes then what that will be.
Also send me what should be line configuration for this.
Is it require any modem setting change, if yes then please send me.
Also conform me that wheather cisco router works with Dlink modem or not.
Please replay immediatelly.
With Regards
Anand
01-21-2005 05:22 AM
Dear Mr. Anand
This is chitan Upadhyay from India, I have referred your config, please confirm which make of external modem you are using. Also do u have analog modem port card installed in your router.
Regards
Chintan Upadhyay
Gujarat State
India
e-mail: chintan_u@yahoo.com
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide