disable Telnet on 3524 XL switch

[aigars.polis]

Hi,

I'm not familary with cisco switches and maybe someone can help? How can I disable telnet?

Googled and find info about access-list, but it's not working for me. Maybe, I was misstaken with this command.

With this access list I can make telnet from anywhere

Output from config:

-----------------------------------------------------------

no ip http server

access-list 110 deny   tcp any any eq telnet

access-list 111 deny   tcp any host x.x.x.x eq telnet

access-list 111 permit ip any any

snmp-server engineID local

snmp-server community xxxx RO

!

line con 0

exec-timeout 0 0

transport input none

stopbits 1

line vty 0 4

access-class 111 in

password *******

login local

transport input none

line vty 5 15

access-class 111 in

password *******

login

!

end

-----------------------------------------------------------

[Leo Laohoo]

line vty 0 15

transport input ssh

This will allow ssh.

[andamani · Accepted solution]

Hi,

That is right. You will be access the switch from anywhere because of the ACE "access-list 111 permit ip any any" .

Please remove the Access-list 111

i.e.

line vty 0 15

no access-list 111 in

Also try the following

line vty 0 15

no transport input none

Let me know the results.

Hope this helps.

Regards,

Anisha

P.S.: please mark this post as answered if you feel your query is resolved. Do rate helpful posts.

[aigars.polis]

Thanks! Thats worked.