cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
401
Views
5
Helpful
1
Replies

DMVPN Spoke with a Private IP

ronit
Level 1
Level 1

We are planning to build a DMVPN setup. The hubs all plan to have static Public IPs. The spokes however, in some cases will sit behind an ISP router and have private IPs. In some cases they will have LTE CG-NAT IPs. 

 

We only need Spoke to Hub tunnels. We don't need spoke-to-spoke tunnels.

 

Is this doable if the DMVPN spokes don't have public IPs? We need to assume that no port-forwarding from Out to IN is possible for these private IPs.

1 Accepted Solution

Accepted Solutions

@ronit The spokes will initiate the tunnel to the hub(s), so yes the spoke routers can be behind a NAT device and establish a tunnel to the hub

View solution in original post

1 Reply 1

@ronit The spokes will initiate the tunnel to the hub(s), so yes the spoke routers can be behind a NAT device and establish a tunnel to the hub

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: