Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
374
Views
0
Helpful
2
Replies

dynamic filters and vpn concentrator

ANDRE MUENTENER
Level 1
Level 1

‎06-01-2003 11:27 PM - edited ‎02-21-2020 12:34 PM

Hi all

I've setup a test with dynamic filters on acs 3.1 with radius attributes and a test with pix acls. both test didn't work with my vpn concentrator sw ver. 4.01. I checked the "Monitoring | Dynamic Filters Screen" for the dynamic filter, but it didn't show up either. I did the setup all as explained on the cco.

Do you have any experiences with dynmaic filters on vpn concentrator?

regards, andre

Labels:
0 Helpful
2 Replies 2

jsivulka
Level 5
Level 5

‎06-06-2003 06:49 AM

Hi, you need to configure the Dynamic Filters on your ACS server only while the configuration on the VPN Concentrator will remain static. You do not need to change the configuration on the concentrator.

0 Helpful

ANDRE MUENTENER
Level 1
Level 1
In response to jsivulka

‎06-09-2003 10:10 PM

Hi, changing the nas properties "Authenticate Using" in ACS to "RADIUS (Cisco IOS/PIX) helped. Now it is working.

Andre

0 Helpful
Customers Also Viewed These Support Documents