Easy VPN client (ASA5505) and IKE keepalive problem
My problem is I am using an ASA5505 (7.2.4 SW) as an easy VPN client. I want to set the IKE keepalive to 20 seconds with a 2 times retry. I have to set this in the tunnel group IPsec attributes section of the Easy VPN server (also ASA5505 with 7.2.4 SW)
tunnel-group TEST1 type ipsec-ra
tunnel-group TEST1 general-attributes
tunnel-group TEST1 ipsec-attributes
isakmp keepalive threshold 20 retry 2
when the client connects and I do a "show vpnclient detail" command I see
crypto isakmp nat-traversal 20
tunnel-group 184.108.40.206 type ipsec-ra
tunnel-group 220.127.116.11 ipsec-attributes
isakmp keepalive threshold 90 retry 5
having been learned from the Easy VPN server. Any ideas how I can reduce this on the client as 90 secs with a 5 times retry is way too long.
When I log into SecureX, I'm given an option to Sign in with MIcrosoft. What information is shared from my profile with Cisco?
1. If you signed in with your work email, the information shared from your profile is controlled by your or...
Stealthwatch Enterprise can be leveraged to monitor vulnerable devices, and alert on potential exploitation by bad actors looking to exploit Ripple20 and other potential vulnerabilities.
Note that the concepts and procedures outlined here can be used for...
The following is useful to those entities interested in monitoring appropriate usage of Cisco WebEx resources within their environments, as well as those interested in tracking additional metrics around usage of the WebEx service.
The relevant supporting...
I'm using AMP, and when I activated the SecureX Ribbon, I mistakenly used the wrong account to connect to SecureX. Now my SecureX Ribbon is connected to the wrong account. How do I fix it?
You can clear the SecureX Authorizatio...
I'm using Umbrella, and when I activated the Ribbon, I mistakenly used the wrong account to connect to SecureX. Now my SecureX Ribbon is connected to the wrong account. How do I fix it?
You can clear the SecureX Authorization for t...