cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
237
Views
0
Helpful
0
Replies
Highlighted
Cisco Employee

EASY VPN hardware client not working.

Hello,

I'm experiencing an issue. I have the following topology:

192.168.12.0 /24 --- inside192.168.12.1(ASA5502)192.168.1.71 dhcp ---192.168.1.254 ISP GATEWAY ===201.144.194.226 PEER --Inside 192.168.0.0

I have VPNCLIENT configured correctly but can't seem to pass traffic or get the tunnel up. I'm attaching debug crypto isakmp 10, debug crypto ipsec 10, logging debug messages. Also find the config attached.

I'm trying to reach from 192.168.12.10 to a server 192.168.1.200 on remote.

Running version 8.2(5)

Any idea of what i have configured wrong?

Thanks

Tony

0 REPLIES 0