07-14-2005 06:09 AM - edited 02-21-2020 01:52 PM
Hello Everyone
I'm using a Cisco 2821 router with advanced security feature set.
I have one public IP address used on an external interface, internal hosts use PAT to access the internet.
Is it possible to run a Easy VPN Server on this external interface while at the same time having internal hosts using Cisco VPN Client (IPSec over UDP) to connect to other VPN Servers on the internet?
I suspect that when internal hosts are using the Cisco VPN client that the Easy VPN Server is intercepting the packets on the way back in and dropping them.
Thanks in advance.
Crispin
07-20-2005 11:13 AM
As far as I see it, these are two different things. Configuring a box as EzVPN server and allowing the internal VPN clients to have tunnels with a concentrator outside can go hand in hand.
07-20-2005 09:54 PM
when configuring the remote vpn on the router, the last step is to apply the crypto to an interface.
with the posted scenario, the crypto will be applied onto the outside interface thus it will not affect internal user to access other vpn server from the internet.
hope this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide