Easy VPN server setup to tunnel ALL traffic?

[j_friedrich]

Hi guys,

       Does anyone have a link or tutorial to point me in the right direction?  Here's is the example I followed:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd80313bdf.pdf

I would like the Easy VPN client to tunnel all traffic thru the vpn.  That includes the internal and external.  So, for example, web browsing would also be done thru the tunnel from the client computer.

Thanks for the help!

Jason

[Eugene Korneychuk]

Hello,

In a basic VPN Client scenario, all traffic from the VPN Client is encrypted and sent to the VPN server no matter what its destination is.

This is configuration guide:

http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml

It contains split tunneling, but if you want to tunnel all, just don't use it.

Please rate helpful posts

Best Regards,

Eugene

[j_friedrich]

Hi,

     Thanks for the reply.  So does my initial example link I followed already ensure ALL trafic is sent thru the vpn.  Thanks for the split tunneling example in case I need it.

THANKS!

Jason

[Eugene Korneychuk · Accepted solution]

Hi Jason,

Since no split-tunnels are configured there, yes all traffic will be sent through the tunnel.

Please rate helpful posts

Best Regards,

Eugene