cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1892
Views
0
Helpful
3
Replies

Easy VPN server setup to tunnel ALL traffic?

j_friedrich
Level 1
Level 1

Hi guys,

       Does anyone have a link or tutorial to point me in the right direction?  Here's is the example I followed:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd80313bdf.pdf

I would like the Easy VPN client to tunnel all traffic thru the vpn.  That includes the internal and external.  So, for example, web browsing would also be done thru the tunnel from the client computer.

Thanks for the help!

Jason

1 Accepted Solution

Accepted Solutions

Hi Jason,

Since no split-tunnels are configured there, yes all traffic will be sent through the tunnel.

Please rate helpful posts

Best Regards,

Eugene

View solution in original post

3 Replies 3

Eugene Korneychuk
Cisco Employee
Cisco Employee

Hello,

In a basic VPN Client scenario, all traffic from the VPN Client is encrypted and sent to the VPN server no matter what its destination is.

This is configuration guide:

http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml

It contains split tunneling, but if you want to tunnel all, just don't use it.

Please rate helpful posts

Best Regards,

Eugene

Hi,

     Thanks for the reply.  So does my initial example link I followed already ensure ALL trafic is sent thru the vpn.  Thanks for the split tunneling example in case I need it.

THANKS!

Jason

Hi Jason,

Since no split-tunnels are configured there, yes all traffic will be sent through the tunnel.

Please rate helpful posts

Best Regards,

Eugene

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: