cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1543
Views
0
Helpful
4
Replies

Error Message Decode Help Needed

contech-nelsong
Level 1
Level 1

I am getting the following error message from two devices on my network:

CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac verify failed for connection id=<removed> local=<removed> remote=<removed> spi=F1E30F16 seqno=0000905D

Cisco decodes the message as:

%CRYPTO-4-RECVD_PKT_MAC_ERR : decrypt: mac verify failed for connection id=[dec]

Explanation   MAC verify processing failed. This may be due to the use of the wrong key by either party during the MAC calculations. Some might consider this a hostile event.

Recommended Action   Contact the peer's administrator.

Can anyone help me understand this?

I've looked in vain for MAC Verify processing, I've also checked for MAC calculations etc...

I need to know what's causing this error, and whether it is a significant problem. The VPN seems to work, but am I losing performance as a result of this?


Thanks

Gareth

1 Accepted Solution

Accepted Solutions

If you have verified that your keys are correct, it seems this might be a bug.

https://supportforums.cisco.com/message/708073#708073

View solution in original post

4 Replies 4

contech-nelsong
Level 1
Level 1

bump

If you have verified that your keys are correct, it seems this might be a bug.

https://supportforums.cisco.com/message/708073#708073

Just FYI, I had the same problem on my 1841 routers and upgraded to the latest release of 12.4(T) and have not had the problem since.

That's just what I wanted to hear thanks.


The device is scheudled for an up to a new revision, and this will do nicely for me to get the donwtime.


Thanks for your help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: