01-08-2014 04:18 PM
Here's my current network:
I'm trying to VPN tunnel into the ASA using the Cisco VPN Client software.
Here's my config ASA config: http://pastebin.com/raw.php?i=ad6p1Zac
Here's my VPN Client Connection entry details:
(Password: cisco)
When I try to connect, I get the error message "The received HASH payload cannot be verified".
What does this error mean and how can I resolve it?
Solved! Go to Solution.
01-09-2014 01:35 AM
I believe you should enter this information in the group authentiation fields:
(Just below "Group Authentication")
Name: vpnclientgroup
Password: [whatever you have entered as a pre-shared-key below]
tunnel-group vpnclientgroup ipsec-attributes pre-shared-key *****
After tunnel establishmet you will get a password pop-up, there you enter "David" and the associated password.
01-09-2014 01:35 AM
I believe you should enter this information in the group authentiation fields:
(Just below "Group Authentication")
Name: vpnclientgroup
Password: [whatever you have entered as a pre-shared-key below]
tunnel-group vpnclientgroup ipsec-attributes pre-shared-key *****
After tunnel establishmet you will get a password pop-up, there you enter "David" and the associated password.
01-09-2014 08:57 AM
Thank you, thank did it!
01-09-2014 09:08 AM
You are welcome, and thank you for rating!
Some people forget to rate helpful answers...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide