02-15-2019 07:49 AM - edited 03-12-2019 05:34 AM
HI
See attached file my question is I have a vpn router on a remote site which peers with our internal vpn router at our main site, we also have a broadband connection at remote site, Q. how could I set this up so if main link across VPN goes down the traffic then goes over broadband connection.???
02-15-2019 08:45 AM
Hi
How you configured your actual L2L?
You have different solution:
- changing default route to go over your broadband if your primary internet goes down (you also need to an eem to clear the actual crypto, to ensure it will work fine)
- configuring your L2L using VTI capability. Then you can have 2 tunnels always up and manage the primary vs secondary based on routing OR also no shut the 2nd tunnel interface by EEM if primary internet goes down.
02-15-2019 08:51 AM
You can make 2 Tunnels UP from remote site to main office, and using IP SLA track the Tunnel 0 - Main one the one working.
if that fails to IP SLA can move to Tunnel1
Since we dont know the device to office exact config : here is the reference guide :
https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ft_vpnha.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide