cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
261
Views
0
Helpful
2
Replies
Highlighted
Beginner

FTD Migration From FMC to FDM

Due to a security concern of running the sftunnel over a WAN a connection we may need to use the FDM over FMC. The FTD appliance is currently configured with a manager - what do I need to do to manage the appliance locally? If I remove the manager from the CLI, will that give me access to the FDM? I do have ssh access to the management, but currently cannot console in. 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Mentor

@Scott_22 

Use the command configure manager delete to delete the FMC manager, but the configuration won't be wiped. To wipe the configuration you'd need to run the commands configure firewall transparent and then configure firewall routed, all configuration will be removed (I don't believe the management configuration is lost, best you test this beforehand). You configure local management using the command configure manager local.

HTH

View solution in original post

2 REPLIES 2
Highlighted
VIP Mentor

@Scott_22 

Use the command configure manager delete to delete the FMC manager, but the configuration won't be wiped. To wipe the configuration you'd need to run the commands configure firewall transparent and then configure firewall routed, all configuration will be removed (I don't believe the management configuration is lost, best you test this beforehand). You configure local management using the command configure manager local.

HTH

View solution in original post

Highlighted

Exactly what I was looking for! Thank you.

Content for Community-Ad