cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
118
Views
0
Helpful
1
Replies
Highlighted

FTD - More than one Remote Access VPN Profile - using FDM

Hello Community,

 

we need an additional VPN Remote access Profile for a special User group. But on the Firewall Device manager Web interface it is only possible so set one.

The second VPN Remote access profile should have an own IP Address rage. Can someone help me please?

 

System:

Firepower 2110 Threat Defense Version 6.3.0 Build 83

Best Regards,

Michael

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advisor

Re: FTD - More than one Remote Access VPN Profile - using FDM

Hi,

Multiple Connections Profile were introduced in FTD/FDM 6.4, release notes here.

 

You could either upgrade to 6.4 (patch 7 is current recommended patch level for 6.4). Alternatively if you use RADIUS for authentication you could dynamically assign a different VPN Pool or DHCP scope depending on AD group membership.

 

HTH

View solution in original post

1 REPLY 1
Highlighted
VIP Advisor

Re: FTD - More than one Remote Access VPN Profile - using FDM

Hi,

Multiple Connections Profile were introduced in FTD/FDM 6.4, release notes here.

 

You could either upgrade to 6.4 (patch 7 is current recommended patch level for 6.4). Alternatively if you use RADIUS for authentication you could dynamically assign a different VPN Pool or DHCP scope depending on AD group membership.

 

HTH

View solution in original post