04-03-2020 05:09 AM
Hello Community,
we need an additional VPN Remote access Profile for a special User group. But on the Firewall Device manager Web interface it is only possible so set one.
The second VPN Remote access profile should have an own IP Address rage. Can someone help me please?
System:
Firepower 2110 Threat Defense Version 6.3.0 Build 83
Best Regards,
Michael
Solved! Go to Solution.
04-03-2020 05:33 AM
Hi,
Multiple Connections Profile were introduced in FTD/FDM 6.4, release notes here.
You could either upgrade to 6.4 (patch 7 is current recommended patch level for 6.4). Alternatively if you use RADIUS for authentication you could dynamically assign a different VPN Pool or DHCP scope depending on AD group membership.
HTH
04-03-2020 05:33 AM
Hi,
Multiple Connections Profile were introduced in FTD/FDM 6.4, release notes here.
You could either upgrade to 6.4 (patch 7 is current recommended patch level for 6.4). Alternatively if you use RADIUS for authentication you could dynamically assign a different VPN Pool or DHCP scope depending on AD group membership.
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: