I have one question about get vpn, we have getvpn from HO to branches. branches does not have internet, they access only HO apps. My question is that when i was enable ip accounting on outside-interface of branche router, i see the lots of branche user hitting public ip and i can see the bytes also increasing, i dont known how i can trace that and how i can block that traffic.
In getvpn HO to branches, branches does not have internet and when was try to ip accounting on outer interface of branch router, this is local ip address hitting to public ip address. anybody can tell me how i can filter this and why it show that and thier is no internet in branches.
Radius server configuration for 802.1X
Server radius test1
Address ipv4 10.1.1.1
Server radius test2
Address ipv4 10.1.1.2
aaa group server radius TEST-gr
server name test1
server name test2
Umbrella’s cloud-delivered firewall (CDFW) is a cool features that provides Firewall Services in the Cisco Umbrella Cloud without the need to deploy on-premises firewall devices and visibility and control for internet traffic across all branch offices. To...
SymptomsDownloadable ACL (dACL) does not take effect on the IOS-XE Network Access DevicesDiagnosisCreating redirection ACL on the IOS-XE device failed to redirect the specified traffic for captive portal redirectionSolutionEnable device tracking, Below is...
Multiple Cisco Security Technologies in a single book : ASA Firepower, WSA, Umbrella, ISE and VPN with 100 percent 100 practical scenarios with 70 Labs to cover important topics of the Cisco SCOR Exam. The best part is ISE with interesting scenarios wi...