I would like to use GET VPN upon a MPLS network (20 CE sites) with a few constraints: - Each CE site has 2 x WAN links with load-sharing on it.
- WAN link rates are at most 30 Mbps, except for the datacenter which has 2 x 250 Mbps links - CPEs are routers (max. C3825 used), except for the datacenter which uses 2 x 6503-E Catalyst switches - 2 VRFs (blue and green) are implemented but only 1 VRF (blue) needs GET VPN
It seems to me there are too many constraints to work properly.
This article is intended to be a simple example of configuring AnyConnect relevant syslog messages to be sent from the ASA to a Syslog server. The syslog server in this example is Spunk but almost any syslog server should be do the job. The ...
NGFW Spring 2020 Releases
It’s official! FTD 6.6, ASA 9.14.1, and FXOS 2.8 have been released. We want to thank the hundreds of team members for the tens of thousands of man-hours dedicated to driving this critical release over the finish line. 120...
Hi,I was trying to 2fa cisco duo , all the required settings done as per below . The problem is duo cloud does nti not getting any request from the asa . So I am not getting any code from the duo https://www.youtube.com/watch?v=6nEvmc8wji...
This event continues the conversation of our recent Community Ask Me Anything event "Secure Remote Workers".
To participate in this event, please use the button to ask your questions
Here’s your ch...
User Experience Enhancements
As part of the Cisco Common User Experience program, we are working towards a more uniform user experience and terminology alignment. This program runs across all Cisco security products.
Early Access introduces a...