How to enable "allow local lan access" on ssl VPN client

[Massimiliano Tognon]

Hi to all, i'm using Cisco ssl VPN client 1.1.0.54 on concentrator 3005 rel 4.7.2, i'd like to be able to turn on "allow local lan access" on ssl vpn client, but i'm unable to find how to do this.

Can someone help me?

Thanks

[mchin345]

When an active SVC connection is interrupted and re-established, the remote user receives a message asking if they would like to allow local lan access.

http://www.cisco.com/en/US/products/ps6496/prod_release_note09186a00805f81cc.html

[jverich]

The most important steps are:

--------------------

1.step

Configuration

Policy Management

Traffic Management

Network Lists

You have to add or modify Network List - VPN Client Local LAN

List Name: VPN Client Local LAN

Network List:

0.0.0.0/0.0.0.0

--------------------

2.step

Configuration

User Management

Groups

You have to modify configuration for group in panel "Client Config"

Split Tunneling Policy:

Tunnel everything

+ Allow the networks in list to bypass the tunnel

Split Tunneling Network List:

VPN Client Local LAN

--------------------

During setup connection is possible allow local LAN access.

Other information:

http://www.cisco.com/en/US/customer/products/sw/secursw/ps2308/products_administration_guide_chapter09186a00802d3abc.html#wp1183507

Pepa Verich