IP address assign to VPN client by TACACS+

[leungyp]

I have configured a PIX (6.11) doing VPN with client 1.1 authenticated by Cisco Secure ACS 2.6.

"isakmp client configuration address-pool local testpool outside" working fine.

However, I need to assign IP addrees through TACACS+ by user group, I removed the above line of config.

Show cry ISAKMP sa indicate OAK_ADDRESS_CONFIG and cannot get through.

[ssoberlik]

I don’t see any way to configure this looking through the samples online. Check with the TAC to see if it’s possible but let me know what you come up with.