IPSec P2P tunnel between CISCO ASR1000 to SRX1500 not coming up
I'm trying to bring the ipsec Tunnel between CISCO ASR1K and SRX.I could see the Phas1 &2 negotiated successfully.But CISCO ASA is sending DELETE payload after getting error "reate_ipsec_sa_by_qmv2 got error".
is anyone have any idea what is the meaning of this error?
IPSec data plane support for the Suite-B transforms is only available on the following ASR1000 platforms: ASR1001-X, ASR1001-HX, ASR1002-X, ASR1002-HX, and ASR1006 or ASR1013 with an ESP-100 or ESP-200 module. If Suite-B transforms are configured on unsupported platforms, IPSec tunnel establishment will fail. This problem typically manifests itself with a symptom of tunnel getting established initially but immediately getting torn down, and this pattern repeats. For GETVPN the Group Member will continuously try to re-register with the Key Server if the policy consists of Suite-B algorithms.
For more details please see: IOS and IOS-XE NGE Support Product Tech Note
Check your ipsec configuration (transform-set) for sha2. Some ASR support only sha1.
The Cisco Secure Firewall and SecureX teams are looking for feedback from active Secure Firewall users who may or may not have already activated SecureX. Your responses will help us improve the Firepower experience in SecureX. Th...
Related documentsCisco ISE (Identity Services Engine) IPv6 features by release2.6ISE ManagementNetwork Time Protocol SupportDomain Name System SupportExternal RepositoriesAudit Logs and ReportsSimple Network Management ProtocolAccess Control Lists And Dyn...
Site to Site IPSec VPN with Dynamic IP Endpoint is typically used when we have a branch sites which obtains a dynamic public IP from the Internet ISP. For example an ADSL connection.One important note is that Site-to-Site VPN with Dynamic remote routers P...
On R1, configure a key ring that defines the peer R3:Address: 188.8.131.52Local and remote pre-shared key: cisco R1(config)#crypto ikev2 keyring KRR1(config-ikev2-keyring)# peer R3R1(config-ikev2-keyring-peer)# address 184.108.40.206R1(config-ikev2-keyring-pee...