04-30-2018 10:33 AM - edited 03-12-2019 05:14 AM
05-01-2018 06:32 AM
How much throughput do you have over the site to site VPN? The 2911 only supports up to a maximum of 170Mbps
You could also try adjusting the MTU on the VPN interface to 1300 at both ends of the VPN. Perhaps it is the overhead that is causing issues.
05-01-2018 08:09 AM
To be honest I would be fine if I was getting even a few Mbps over the tunnel but I'm not even getting that. I set up an FTP server/client over the tunnel and it can barely make 30KB/s during transfer.
NTFS file browsing works sorta.. takes time to load small images or documents.
05-02-2018 11:56 AM
I tried setting the ip tcp adjust mss value to 1200 with no difference in transfer speeds.
I set up Wireshark on one side of the tunnel and send a file over ftp for a packet capture.
As soon as the file transfer starts I'm getting a ton of TCP Dup ACK. I'm guessing this is the issue.
Does anyone have any thoughts? I seem to be getting a lot of Duplicate transmissions and I'm not sure why.
05-02-2018 01:28 PM
Is it just file transfer that is slow or everything else also? how large is the file you are transfering?
05-02-2018 01:55 PM - edited 05-02-2018 01:59 PM
I've tried different sized files but most of them are in the 7-300MB range.
It's slow with everything, the users have a shared folder location on the other side of the tunnel and browsing it is painful. Opening an image that's 9kb can take 16 + seconds. Word and pdf documents are way slower depending on the size. Everything eventually opens though.
I disconnected the tunnel and connected my server with a client-server IPsec VPN to the same router on the other end of the tunnel and it works great. Speeds are perfect. I connect to each site separately using this VPN and it works great for me too.
05-08-2018 09:21 AM
Still working on this fix.. I have the users connecting using the client->Server Ipsec client currently but it's not an ideal solution.
I will continue to troubleshoot.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: