ISDN connection problem

[magalicadet]

Hi,

I've read all the forum messages about my problem someone have the same problem but nobody answer the good answer :-)

Tickets have been open from my Cisco contract at TAC services but answers are allways the same : "give me the debug ..."

I'll give you all the elements in this forum and hope someone could help me.

I just want my ISDN connection going up

-----------

THE PROBLEM

-----------

SDSL-878#isdn test call interface bri 0 0170131555

SDSL-878#

*Mar 3 18:53:44.163: ISDN BR0 EVENT: UserIdle: callid 0x8001 received ISDN_CALL (0x0)

*Mar 3 18:53:44.163: ISDN BR0 **ERROR**: process_bri_call: Outgoing call id 0x8001 blocked

*Mar 3 18:53:44.163: ISDN BR0 **ERROR**: UserIdle: process_bri_call failed on call to 0170131555

*Mar 3 18:53:45.083: ISDN BR0 Q921: User TX -> RRp sapi=0 tei=99 nr=0

*Mar 3 18:53:45.087: ISDN BR0 Q921: User RX <- RRp sapi=0 tei=99 nr=0

*Mar 3 18:53:45.087: ISDN BR0 Q921: User TX -> RRf sapi=0 tei=99 nr=0

*Mar 3 18:53:45.099: ISDN BR0 Q921: User RX <- RRf sapi=0 tei=99 nr=0

*Mar 3 18:53:55.099: ISDN BR0 Q921: User TX -> RRp sapi=0 tei=99 nr=0

*Mar 3 18:53:55.103: ISDN BR0 Q921: User RX <- RRp sapi=0 tei=99 nr=0

*Mar 3 18:53:55.103: ISDN BR0 Q921: User TX -> RRf sapi=0 tei=99 nr=0

*Mar 3 18:53:55.127: ISDN BR0 Q921: User RX <- RRf sapi=0 tei=99 nr=0

*Mar 3 18:54:05.123: ISDN BR0 Q921: User RX <- RRp sapi=0 tei=99 nr=0

*Mar 3 18:54:05.123: ISDN BR0 Q921: User TX -> RRf sapi=0 tei=99 nr=0

*Mar 3 18:54:14.163: ISDN BR0 EVENT: UserIdle: callid 0x8001 received ISDN_HANGUP (0x1)

*Mar 3 18:54:14.163: ISDN BR0 EVENT: isdn_hangup: Hangup call to call id 0x8001 ces = 1

*Mar 3 18:54:14.163: ISDN BR0 CC: CCBRI_Go: source id 0x500, state 0, call id 0x0, event 0x5

*Mar 3 18:54:14.163: ISDN BR0 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x8001, event 0x5 ces 1

*Mar 3 18:54:14.163: ISDN BR0 EVENT: process_rxstate: ces/callid 1/0x8001 calltype 1 HOST_QUERY_RESPONSE

My router : Cisco 878

My IOS : c870-adventerprisek9-mz.124-9.T.bin

Here is another debug :

SDSL-878#sh isdn status

Global ISDN Switchtype = vn3

ISDN BRI0 interface

dsl 0, interface ISDN Switchtype = vn3

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 99, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

Layer 3 Status:

0 Active Layer 3 Call(s)

Active dsl 0 CCBs = 0

The Free Channel Mask: 0x80000003

Total Allocated ISDN CCBs = 0

Thanks for your help !

[spremkumar]

Hi

Can you try with 12.4.6T ios code with advance enterprise feature set ?

hope this link also helps u out..

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd96928

regds

[magalicadet]

Hi, thank you for your answer but the Senior engineers confirm that 878 doesn't allow callout from ISDN interface. It only allow the callin for management.

I need to change my 878 for a 1803 ;-)

Thank you for your help.