cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1288
Views
0
Helpful
4
Replies
Highlighted
Enthusiast

ISE : cisco windows anyconnect compliance module upgrade from 3.6 to 4.3

Hi All,

 

How can I upgrade Cisco windows compliance module from 3.6 to 4.3 without user interaction ?

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

AnyConnect downloader will detect it and upgrade automatically, after the users connected to the network and ISE posture module discovered the ISE PSN, given that ISE Client Provisioning policy rules updated with the newer CM version(s),

View solution in original post

4 REPLIES 4
Highlighted
Cisco Employee

moving to anyconnect, you would need to push it out via MSI and patch management
Highlighted

Already try to do it via MSI way but the anyconnect module (Version 4.6) is not able to contact the PSN.
We did a RollBack to Anyconnect 4.3 and compliance module 3.6.
Highlighted
Cisco Employee

AnyConnect downloader will detect it and upgrade automatically, after the users connected to the network and ISE posture module discovered the ISE PSN, given that ISE Client Provisioning policy rules updated with the newer CM version(s),

View solution in original post

Highlighted

Thank you very much!
Content for Community-Ad