cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
640
Views
0
Helpful
2
Replies
Highlighted
Beginner

Juniper Netscreen SSG20 connected directly to Cisco PIX 525.

Hi All, I have a third party vendor that needs to put a Juniper SSG20 VPN device into our network. I'd like to plug it into a PIX 525 directly. Anyone attempt the same thing,? Any issues I should be careful of?

I am attaching a diagram of the proposed layout.


Thank you.

dmitry

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: Juniper Netscreen SSG20 connected directly to Cisco PIX 525.

Shouldn't be a problem as long as you know what protocol and ports Juniper use so you can open it on the PIX 525 ACL.

View solution in original post

2 REPLIES 2
Highlighted
Cisco Employee

Re: Juniper Netscreen SSG20 connected directly to Cisco PIX 525.

Shouldn't be a problem as long as you know what protocol and ports Juniper use so you can open it on the PIX 525 ACL.

View solution in original post

Highlighted
Beginner

Re: Juniper Netscreen SSG20 connected directly to Cisco PIX 525.

Thank you.