09-04-2010 04:30 AM
Dear all ,
I am trying to replicate my client scenarion on GNS.
this is a straight forward l2l ios vpn and i am not using NAT on both the routers .
when i am trying to trigger VPN (ping using source interface), VPN is not coming up and their is no errors while debugging isakmp
Please go throught the attached configuration and suggest me
thanks Jibson
Solved! Go to Solution.
09-04-2010 04:47 AM
There doesn't seem to be routing configured for each LAN. Might need to configure default route on each router to point towards each other.
Also, enabling the "crypto isakmp enable".
All other configuration looks OK.
09-04-2010 04:47 AM
There doesn't seem to be routing configured for each LAN. Might need to configure default route on each router to point towards each other.
Also, enabling the "crypto isakmp enable".
All other configuration looks OK.
09-04-2010 05:42 AM
That worked..........
Thanks a lot for your support.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide