cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
959
Views
0
Helpful
7
Replies

L2L Multispoke Config Issue

SyITec001
Level 1
Level 1

Hello,

I'm new to this version of ASDM / CLI

ASA 9.1(3) ASDM 7.1(4)

I'm currently running TWO 5512x. They are connected through VPN.

NETWORK_OBJ_192.168.42.0_24: 192.168.42.1 / 24

Filmtrack-Dev: 192.168.43.1 / 24

AWSV: 10.1.0.0 /16

RSORD: 192.168.200.0 / 24

Traffic is passing fine for both main and dev. However I cannot pass traffic to dev for the AWSV and RSORD subnets. ASWSV and RSORD are connected to MAIN through VPN. Main can connect to AWSV and RSORD

I've seen a couple of discussions which address the same thing. I've attempted to make those changes, but it's still not working. Maybe a fresh pair of eyes can see what I've missing or misconfigured. Thanks for any insight and input.

Most of these entries were created when the wizard was used to create the tunnels.

Message was edited by: Chuck Ostlie - Updated attachments

7 Replies 7

Jouni Forss
VIP Alumni
VIP Alumni