10-11-2016 06:34 AM
Hi Guys,
We have the send office opening soon and need to extend a network of existing office to a new office.
We also need two offices connected with a tunnel. So I thought about creating a L2TP tunnel over IPsec VPN.
I found this article but it describes Site-to-Client VPN setup, not Site-to-Site:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/vpn_l2tp_ipsec.pdf
One office has ASA 5505, other office will have ASA 5510.
Please advice how do I configure a Site-to-Site L2TP tunnel over IPsec VPN, or advice the alternative solution.
Thanks
01-12-2019 10:21 AM
Hey Taras,
I know this post is old but if you are still having this issue, please check out this pdf from Cisco on configuring L2TP over IPSEC.
Hope this helps everyone that is having this issue.
-- Adam
01-12-2019 02:15 PM
Both side are ASA. what code you running on these boxes?
here is a good reference guide for you with ikev2 setup
https://www.petenetlive.com/KB/Article/0001429
here is good reference guide for you with ikev1 setup
https://www.petenetlive.com/KB/Article/0000050
any problem let us know. we are here happy to help you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide