Below is the debug I am getting on the ASA, I find Meraki support not very helpful
Passes phase 1 but get a disconnect from the Meraki when doing phase 2
anybody help
IKEv2-PLAT-2: (804): Site to Site connection detected
IKEv2-PLAT-2: (804): P1 ID = 255
IKEv2-PLAT-2: (804): Completed authentication for connection
IKEv2-PLAT-2: (804): connection auth hdl set to 1674
IKEv2-PLAT-2: (804): AAA conn attribute retrieval successfully queued for register session request.
IKEv2-PLAT-2: (804): idle timeout set to: 30
IKEv2-PLAT-2: (804): session timeout set to: 0
IKEv2-PLAT-2: (804): group policy set to L2L-Ipsec
IKEv2-PLAT-2: (804): class attr set
IKEv2-PLAT-2: (804): tunnel protocol set to: 0x44
IKEv2-PLAT-2: (804): IPv4 filter ID not configured for connection
IKEv2-PLAT-2: (804): group lock set to: none
IKEv2-PLAT-2: (804): IPv6 filter ID not configured for connection
IKEv2-PLAT-2: (804): connection attribues set valid to TRUE
IKEv2-PLAT-2: (804): Successfully retrieved conn attrs
IKEv2-PLAT-2: (804): Session registration after conn attr retrieval PASSED, No error
IKEv2-PLAT-2: (804): connection auth hdl set to -1
IKEv2-PLAT-2: (804): Encrypt success status returned via ipc 1
IKEv2-PLAT-3: (804): SENT PKT [INFORMATIONAL] [103.xx.xx.xx]:500->[148.xx.xx.xx]:500 InitSPI=0x6b8abf186fdf7ba1 RespSPI=0xd0b47244cebc96ea MID=00000002
IKEv2 Recv RAW packet dump
6b 8a bf 18 6f df 7b a1 d0 b4 72 44 ce bc 96 ea | k...o.{...rD....
2e 20 25 20 00 00 00 02 00 00 00 4c 00 00 00 30 | . % .......L...0
9c c0 a9 da c8 3c d2 d2 79 9e 27 d8 77 1a a5 76 | .....<..y.'.w..v
cf e8 72 3a 3f 66 a1 f5 1c d4 a0 10 2a 37 24 76 | ..r:?f......*7$v
e8 11 67 9a 07 70 8e 7e cc 29 fd 2b | ..g..p.~.).+
IKEv2-PLAT-2: (804): Decrypt success status returned via ipc 1
IKEv2-PLAT-2: (804): IKEv2 session deregistered from session manager. Reason: 8
IKEv2-PLAT-2: (804): session manager killed ikev2 tunnel. Reason: Internal Error
IKEv2-PLAT-2: (804): PSH cleanup
