Experts,
I need to create a Cisco VPN Client connection:
I am following the cisco vpn client link and I don't have the command
crypto isakmep client configuration group XXXXX
http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml
This is what I get:
crypto isakmp client configuration ?
address-pool Set network address for client
This is my show version, any ideas if there is an IOS that will work:
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9S-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 19-Jun-03 16:35 by pwade
Image text-base: 0x8000808C, data-base: 0x81280FF0
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
MYROUTER-- uptime is 23 hours, 5 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ik9s-mz.122-17a.bin"
This product contains ...etc etc
cisco 2611XM (MPC860P) processor (revision 0x100) with 60416K/5120K bytes of memory.
Processor board ID JAE0716032R (3260324458)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Any ideas as to what IOS can do the trick for me??? Or is it even possible?
Thanks!
