01-31-2005 02:07 AM
Hi all,
I've an enviroment with cisco 3640 acts as Access Server, with ISDN pri connection and Mica Modems to terminate the PSTN remote access.
I'd like to understand if, from my PC client, connecting to my modem, I can type some "AT commands" to retrive the remote (mica modem, router side) modem's configuration (like: protocols, speeds, db, ber, etc... )
thank you very much.
kind regards,
G.
02-01-2005 09:19 AM
Hello, you can do it throught hyperterminal session at your client PC. The next url may be very useful for you.
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008009457e.shtml
Regards.
02-01-2005 09:35 AM
There is no out of band AT access to mica modems. So you will not be able to see the configs/settings of mica modem in which you have dialed into using PC and analog modem.
You can use exec commands (at the router prompt) like "show modem config x/y" and "show modem operational-status x/y" to see the configs and realtime connection data of a mica modem at port x/y.
02-02-2005 12:59 AM
Thank you at all,
G.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide