09-08-2011 12:54 PM
I have a two ASA 5520's and I want to be able to see or monitor the traffic between each tunnel. I am using external addresses but for the sake of this question I will use the following: 1.1.1.1 to 2.2.2.2 . How can I montior the traffic? Thanks in advance for your cooperation.
you can email me @ jgreene@eagleinvsys.com
09-13-2011 11:52 PM
Hi,
When you say that you want to monitor the traffic, does that mean that how much traffic was encrypted, if yes, then try the commands:-
sh crypto isakmp sa and sh crypto ipsec sa
if this is not what you are looking for then please elaborate.
Sian
09-14-2011 04:41 AM
I need to make sure the tunnel is up and running properly. I want to see if the two tunnels are talking with each other.
09-15-2011 07:32 AM
Hi,
What's the plan of monitoring?
SNMP?
If yes, there is problem, because OIDs of tunnels are changing everytime, tunnel is established.
I also solve this problem, but haven't found any free tool.
If you're prepared to pay, then this one seems to look fine : http://www.vpnttg.com/
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: