Multiple site-to-site + remote access

[Jernej Vodopivec]

Is it possible to have many site-to-site VPN connections established from main office to branch offices and allow remote users to connect with Cisco VPN client at the same time to the router in a branch office? I have Cisco 800 series routers (892) in the main office.

Thanks for any suggestion, link...

[Istvan Matyasovszki · Accepted solution]

Hello Jernej,

If you have a c8xx router in the branch as well, then the scenario you've described

is possible.

See here an example :

Configuring an IPsec Router Dynamic LAN-to-LAN Peer and VPN Clients

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml

Basically you can set multiple entries in a crypto map, both for lan to lan and remote access.

br

-istvan

[Jernej Vodopivec]

Thank you Istvan - this is just what I was looking for.

There are snapgear routers in branch offices but that shouldn't make any problems (I hope ).

There is http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094685.shtml another link that is useful.