cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1335
Views
0
Helpful
4
Replies
jamesupcott1
Beginner

Multiple Subnets over Cisco ASA Site-to-site VPN

I need to to set up a site to site vpn between two Cisco ASA's. I need mulitple networks from each end to be able to communicate over the vpn connection.

My question is, when I set the site-to-site vpn up using the wizard on ASDM, do I simply need to configure an object-group network and add each network as a network-object to the group? So I would have multiple network-objects representing my networks, and they all fall under the object-group.

If this is the case then on the site-to-site vpn wizard do I then just select the object-group's I wish to use for the local and remote networks?

Many Thanks

James

1 ACCEPTED SOLUTION

Accepted Solutions
Marvin Rhoads
Hall of Fame Guru

Yes - that's correct.

View solution in original post

4 REPLIES 4
Marvin Rhoads
Hall of Fame Guru

Yes - that's correct.

View solution in original post

Thank you Marvin

You're welcome. Please mark your question as naswered if it has been.

Hi Marvin.

Not sure if you may be able to assist me further :) I have an additional question now open which I'm sure you will be able to answer.

https://supportforums.cisco.com/discussion/13294391/cisco-asa-site-site-vpn

Content for Community-Ad