cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1013
Views
0
Helpful
0
Replies

NAM profile Editor

onikaycee
Level 1
Level 1

Please i have this challenge i have been battling with, i have 2 radius servers, ISE 2.2 and  Microsoft Network Policy server. I have 2 SSID created for each radius server authentication. Let me call them ISE-SSID and NPS-SSID. My task is to make sure there is seamless fail-over when ISE-SSID if not broadcasting to NPS-SSID. I am using NAM profile Editior and i have edited NAM to allow only this 2 SSIDs as cooperate network and i specified PEAP be used as the Authentication method.  Now my issue is when I remove ISE-SSID and the Anyconnect NAM tries to connect to NPS-SSID, it doesn't authenticate, it bounces back. Every time i have tried this,the NAM doesn't take the username and password. It bounces it back. I am sure NPS uses only PEAP and i have configured that but still Any connect  bounces the credential. When i test NPS alone, i have to manually select PEAP when connecting, but since i have edited the NAM to use only PEAP, i think it should work but it is not working

please is there anyone out there that could guide me on how to fix this as i am running out of time to deliver on this

0 Replies 0