09-16-2010 10:41 AM
Hello,
I have a question about the new Nat commande on asa 5505 v 831.
How can I translate this nat commande from asa 5505 v802 in asa 5505 v831 ?
Commande in asa 5505 v802 :
access-list EURODATA extended permit ip 10.19.3.0 255.255.255.0 10.20.0.0 255.255.0.0
access-list no_nat extended permit ip 10.19.3.0 255.255.255.0 10.20.0.0 255.255.0.0
nat (inside) 0 access-list no_nat
nat (inside) 1 0.0.0.0 0.0.0.0
Thanks by advance for your response...
09-16-2010 11:08 AM
I believe it would look something like this :-
8.0.2 :-
access-list no_nat ext per ip 10.19.3.0 255.255.255.0 10.20.0.0 255.255.0.0
Global(outside) 1 interface
nat(inside) 0 access-list no_nat
nat (inside) 1 0.0.0.0 0.0.0.0
8.3.2 :-
object network obj-local
subnet 10.19.3.0 255.255.255.0
object network obj-remote
subnet 10.20.0.0 255.255.0.0
nat (inside,outside) 1 source statis obj-local obj-local destination obj-remote obj-remote
object network obj_any
subnet 0.0.0.0 0.0.0.0
nat (inside,outside) dynamic interface
I hope i am right , experts please comment.
thanks
manish
09-20-2010 07:07 AM
Yes Manish, I forget the line : Global(outside) 1 interface
I follow your instructions and it's work fine !
Many thanks Manish for your explications...
09-20-2010 08:56 AM
Hi Arnould,
Happy to help . Please Mark the Thread as answered if possible.
Thanks
Manish
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: