NAT with VPN on ASA 5505 V8.2

[mkamelcisco]

Hi,

I have a problem a make a VPN connection between two asa 5505 v 8.2, and i think that is a Nat problem. i have a cmd and i cannot do it in the asa 5505 V8.2: 

nat (inside,outside) source static 192.168.0.0 192.168.0.0 destination static 192.168.1.0 192.168.1.0 ??

[Diego Lopez]

Hello, 

For ASA version 8.2 the nat exemption needs to be configured like this:

define an access list with the VPN traffic 

access-list nonat extended permit ip local_subnet mask remote_subnet mask 

configure nat rule:

nat (inside) 0 access-list nonat

Regards, please rate. 

[mkamelcisco]

i configured but il still not connecting !!

[mkamelcisco]

i have this msg ever when i configure a crypto map entry :

ciscoasa(config)# Feb 16 06:43:38 [IKEv1]: Ignoring msg to mark SA with specified coordinates <vpnmap, 10> dead

aby ideas ??