09-23-2017 09:53 AM - edited 03-12-2019 04:33 AM
I have a IPSEC tunnel between site A “4331 router” and site B “C800 router”. And a Win10 machine are connected to LAN site on both behind both router. Ping from site A to machine behind router B brings the tunnel up and debug for isakmp and ipsec shows that both phase 1 and 2 completed, and ipsec #pkts encaps: and #pkts decaps: counter increases in site A router but only #pkts decaps: increases on site B router. No end to end connectivity. What is wrong? Please help. and tanks in advance.
/SF
Solved! Go to Solution.
09-27-2017 07:28 AM
Hi
That is correct, sorry that I did not notice at thre time.
09-25-2017 11:52 AM
Hi again
I just notice that I Acctully can bring the tunnel up if I ping from the machine behinde a remote end behinde other router 4331 and crypto ipsec sa shows increasing encap and decap counter but I still do not get answer from the host behinde c800 router.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide