01-09-2002 03:14 AM - edited 02-21-2020 11:33 AM
Hi,
I am using the VPN 3000 client and a PIX 515R 6.1.
When mail is sent the outbox does not show the mail as having left the outbox until refresh is pressed.
Any help would be gratefuly appreciated.
Charlie
01-09-2002 03:42 AM
Hi Charlie
There have been some known issues regarding Outlook and automatic updates, but they should be resolved by now.
Make sure you are using the latest client, and have Outlook set as your default email client.
/Michael
01-09-2002 03:55 AM
Hi,
Yes the VPN client is the latest as of mid December. Outlook is the default client.
Outlook send and recieves fine, it just does not refresh the outbox unless you do it manualy. So sent mails are shown in the outbox after they have gone??
Any help would be appreciated.
Regs
Charlie
01-09-2002 04:03 AM
Hi Charlie
"the latest of mid December", what exact version is that ?
In the log viewer, turn on all logging, and set all levels to HIGH. Then connect, and have a look at what MAPI32 will tell you ..
/Michael
01-09-2002 06:19 AM
Make sure "Scheduled Send and recieve" is turned of. What speeds are they connecting at? I have encountered a slow refresh of the Outbox over dial up and wireless connections as well
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide