10-18-2004 06:09 AM
Hi everyone,
I am having trouble configuring a pix to pix as server and client vpn. I am able to get the vpn to connect and can see data at the main location. The issue is when I try to connect to the SCO Unix host. I can't get a ping response or a telnet session going. Any help would be appreciated.
Thanks.
Mike
Below is the config:
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxx
passwd xxxxx
hostname pixfirewall
domain-name ciscopix.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 100 permit icmp any any echo-reply
access-list 100 permit icmp any any time-exceeded
access-list 100 permit icmp any any unreachable
access-list 100 permit icmp any host xx.xx.xx.xx
access-list 100 permit tcp any host xx.xx.xx.xx
access-list 100 permit ip any host xx.xx.xx.xx
access-list 100 permit udp any host xx.xx.xx.xx
access-list 101 permit ip 10.0.0.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list 101 permit tcp any any
access-list 101 permit udp any any
access-list 110 permit ip 10.0.0.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside xx.xx.xx.xx 255.0.0.0
ip address inside 10.0.0.245 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool ippool 10.3.3.1-10.3.3.254
pdm location 10.0.0.0 255.255.255.0 inside
pdm location 10.0.0.1 255.255.255.255 inside
pdm location 10.0.0.0 255.0.0.0 inside
pdm location 192.168.1.0 255.255.255.0 outside
pdm location 10.0.0.254 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 101
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) xx.xx.xx.xx 10.0.0.1 netmask 255.255.255.255 0 0
access-group 100 in interface outside
route outside 0.0.0.0 0.0.0.0 xx.xx.xx.xx 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
crypto ipsec transform-set myset esp-aes esp-md5-hmac
crypto dynamic-map dynmap 10 set transform-set myset
crypto map mymap 10 ipsec-isakmp dynamic dynmap
crypto map mymap interface outside
isakmp enable outside
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption aes
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup mygroup address-pool ippool
vpngroup mygroup dns-server 10.0.0.1
vpngroup mygroup wins-server 10.0.0.1
vpngroup mygroup default-domain domain.com
vpngroup mygroup split-tunnel 101
vpngroup mygroup idle-time 1800
vpngroup mygroup password ********
vpngroup idle-time idle-time 1800
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:xxxx
10-18-2004 08:32 AM
Have you checked your routing table on the SCO Unix server? I had once the same issue with SCO Unix server.
Add a default route with the remote network and the PIX as default gateway and try again. Do you have another default gateway on your SCO Unix Server ?
sincerely
Patrick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide