Please help with L2TP over IPsec VPN config on PIX 515E v8.0(3)
Everything works with normal inbound and outbound traffic. I'm trying to get remote access VPN working using both iPhone and Windows 7 clients and they're both saying server is not responding. Debug on isakmp and ipsec and debug l2tp have no output. I also have debug level logging and the only thing it shows relating to the client is build and teardown of ICMP, nothing else. I'm trying to learn how to configure this using CLI so I don't want the help of ASDM wizards. Sanitized config is shown below. My inbound ACL on the outside interface is only for allowing server application traffic to go through but nothing else special. Please help!
Thanks in advance, -Ed
Topology: Internet --> Cable Modem --> PIX --> LAN
Hello,i have a N5k-k5548up-af and i have a acl for trusted network which is attached to line vty and to my uplinks interface, and i have around 250 interface vlan and my interface vlans can reach bgp port or snmp port, is there nayway that tune copp to pe...
This event had place on Tuesday 22nd, Septemberat 10hrs PDT
Omar Santos is an active member of the cyber security community, where he leads several industry-wide initiatives and standards bodies. His active role help...
Cisco Defense Orchestrator (CDO) is a cloud-based, multi-device manager that manages security products like Adaptive Security Appliance (ASA), Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.
We make improvement...
There has been a lot of grey area when one needs to get started with ISE or when one does not have any specific background.Could you please guide me to what are the thing that one needs to know inside out and what are the things which require only a minim...
Hello Guys, I'm trying to create a simple script to create new objects on FMC via API, but I'm facing issues(Python 3.8). Script(that pretty simple, I'm not programmer, but I'm trying): import base64import sysimport requestsimport reimport ...