cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
500
Views
0
Helpful
2
Replies

Problem failover ASA 5510 with VPN.

m.freitas
Level 1
Level 1

Dear?s,

I?m have um failover with the ASA 5510.The tunnel L2L is working! When the primary goes for shutdown, the secondary one is activated, but i have problems in the VPN. The following error occurs:

Apr 06 15:27:38 [IKEv1]: IP = 172.19.33.7, Removing peer from peer table failed, no match!

Apr 06 15:27:38 [IKEv1]: IP = 172.19.33.7, Error: Unable to remove PeerTblEntry

After a time the VPN it connects. Somebody has a solution for this?

Thanks,

Marcio - Auriga Informatica

2 Replies 2

p.krane
Level 3
Level 3

First check if your failover is a stateful one, if not change it to stateful. Also check if isakmp commands

isakmp policy 10 authentication pre-share

isakmp policy 10 encryption 3des

isakmp policy 10 hash sha

isakmp policy 10 group 2

isakmp policy 10 lifetime 86400

are configured properly.

My friend! See this new error:

Cannot create dynamic ACL for Backup L2L entry TUNEL_DATACENTERS 20

I use the version 7.2(2)!

Thank you very much!

Marcio - Auriga Informatica.