cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5702
Views
2
Helpful
4
Replies

QM FSM error

Philip Brown
Level 1
Level 1

Hi, Iv'e got a problem with a L2L VPN between a NetScreen 208 and a 3015 concentrator. Here's the error msg, QM FSM error (P2 struct &0x5ad4758, mess id 0x5d1bde99)!

IKE P1 completes fine according to the log on the 3015.

The NS208 P2 looks like this, idletime 0 proposal "g2-esp-3des-sha"

The 3015 P2 looks like this,(see P2 3015.jpg) I can't see a mismatch. Any help would be most thankfully accepted.

4 Replies 4

b.hsu
Level 5
Level 5

Explanation A phase 1 error occurred and the state, event history pairs will be displayed in reverse chronological order.

Recommended Action Most of these errors are benign. If these messages are associated with undesirable behavior, then copy the error message exactly as it appears on the console or in the system log, contact the Cisco Technical Assistance Center (TAC) for further support and provide the gathered information.