RA VPN on 6509

[networker99]

Can someone point me in the direction of a sample config for a remote access VPN on a Cisco Catalyst 6509 (with VPN mod).?

Been searching just cant find one!

[Marcin Latosiewicz]

You always NEED to start here:

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/6500series/76ovwvpn.html

to see what is allowed.

Then on the left hand side, depending on the mode you're going to implment this in (CCON or VRF) you have config examples.

Edit: One moment later I started thinking :-)

Ezvpn is not supported in CCA.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtt07824

For the rest part RA config is done the same way as it's done on any other device, the difference is when one applies crypto connect and crypto engine/crypto map commands.

HTH,

M