cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
771
Views
0
Helpful
1
Replies
cammy.busto
Beginner

Re: AnyConnect NAM/ISE Posture Agent

Hi, where to download the anyconnect NAM? I've been looking for this more than 2hrs already. Please share the link. Thanks a lot

1 ACCEPTED SOLUTION

Accepted Solutions
pcarco
Cisco Employee

Hello,

NAM is not downloaded separately from the core package.  You will need to download the entire AnyConnect MSI and install the core vpn with the NAM module.  If you are deploying from the ASA then enable in the group-policy.  If you use ISE Client Provisioning then ensure the NAM module is enabled in the policy.

   If you do not use VPN then you can hide the VPN tile by using a profile "vpndisable_serviceprofile.xml

Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 4.0 - Deploy AnyConnect [Cisco AnyConnect Secure M…

Best regards,

Paul

AnyConnect & Advanced Threats TME

View solution in original post

1 REPLY 1
pcarco
Cisco Employee

Hello,

NAM is not downloaded separately from the core package.  You will need to download the entire AnyConnect MSI and install the core vpn with the NAM module.  If you are deploying from the ASA then enable in the group-policy.  If you use ISE Client Provisioning then ensure the NAM module is enabled in the policy.

   If you do not use VPN then you can hide the VPN tile by using a profile "vpndisable_serviceprofile.xml

Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 4.0 - Deploy AnyConnect [Cisco AnyConnect Secure M…

Best regards,

Paul

AnyConnect & Advanced Threats TME

View solution in original post

Content for Community-Ad