Hi all, following some instructions i found on the web, I managed to get remote access into my soho 877 router today, However I would like to understand the commands used, Can anyone please comment next to the config what the commands actually mean.
crypto isakmp policy 1
hash md5
authentication pre-share
group 2
!
crypto isakmp client configuration group TEST
key xxxx
dns x.x.x.x
wins x.x.x.x
domain x.x
pool CT_POOL
!
!
crypto ipsec transform-set CT_TRANS esp-3des esp-md5-hmac
!
crypto dynamic-map dynmap 10
set transform-set CT_TRANS
!
crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 1 ipsec-isakmp
!
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
!
Thanks
Carl
