Remote VPN access

[john.hyland]

Hello - I have a site to site VPN set up (works great) but I would like to also have a remote connection when needed. The remote machines are mobile and could be anywhere.

I have setup L2TP VPN on the Mac server (Sierra) but it doesn't seem to work. Is there a better option on the Cisco (RV130) to use?  Thanks kindly John

[JP Miranda Z]

Hi john.hyland,

You should be able to configure a remote access with ipsec with the following config:

http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=e59b1a289c8b4604ae7ff87f979571f5_Set_Up_a_Remote_Access_Tunnel_for_VPN_Clients_.xml

And on your Mac you can select the following option:

Hope this info helps!!

Rate if helps you!! 

-JP-

[john.hyland]

Thanks JP - the instructions are for a different model but even searching on the site for RV130 it showed how to make a tunnel for a defined site only - not a variable remote ip which is what i need.

Is there any reason my the VPN service on the Mac would not work?

J

[JP Miranda Z]

John,

Check this link:

https://supportforums.cisco.com/video/12300226/rv130-and-rv130w-ipsec-vpn-client-configuration

Hope this info helps!!

Rate if helps you!! 

-JP-

[john.hyland]

Thanks JP - the VPN clients seems to be for PCs only