07-21-2009 02:44 AM - edited 02-21-2020 04:17 PM
Dear all,
Can anybody explain the use of reverse-route in Ipsec with help of any diagram.
Please help
Regards
Mahesh
07-21-2009 05:38 AM
Cisco documentation explains it thoroughly.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00809d07de.shtml
07-21-2009 08:44 PM
I have below network
Remote client---> Ipsec router----> MPLS cloud----> customer network
I have enabled reverse-route for one vrf called RAVPN-TESTING on Ipsec router
-----------
crypto dynamic-map RAVPN-TESTING 10
set transform-set CommonTransform
set isakmp-profile RAVPN-TESTING
reverse-route
-----------
I am running BGP between MPLS cloud and customer network .
Now whether I enable or disable reverse-route I am always receiving the Ipsec assigned Ip address 192.168.1.2/32 in customer network
I am not clear what is the role of reverse-route here
Thanks in advance
07-22-2009 06:51 AM
Basically it enters the far end subnets into the local routing table. From there you can redistribute it into your interior routing protocol.
07-22-2009 10:32 PM
Hi collin,
You mean to say Ip assigned to remote cliendt will be available to customer network of central site or i understood wrongly
Please explain
thanks in advance
07-23-2009 05:21 AM
In a L2L there are not 'assigned IPs' so I think we have some confusion there.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide