10-29-2021 07:04 AM
I'm currently practising the configuration of an ipsec tunnel between two ASAs. I'm using a routed based VPN with VTIs on both ASAs. Instead of using static routes I would like to use OSPF to advertise routes over the tunnel. Playing around with the OSPF and VTI config on the ASAs I can't see anything that suggests it can be done, not even with static OSPF neighbours. This old documentation says BGP is the only supported dynamic routing protocol, is this still this true? As I can setup OSPF to run over VTI using just Ipsec (no gre) on the likes of IOS routers. Any help will be greatly appreciated.
Solved! Go to Solution.
10-29-2021 07:10 AM
@BVC BGP is still the only dynamic routing protocol supported on ASA when using a VTI, as of the version 9.16.
10-29-2021 07:10 AM
@BVC BGP is still the only dynamic routing protocol supported on ASA when using a VTI, as of the version 9.16.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide